Class III Water proof Fixture
WITH INJECTED ACRYLIC DIFFUSER

Our waterproof fixtures are designed for interior or external use and while reducing the maintenance costs, allow an economy saving from 65% to 80%. The fixtures are available in length of 2, 4 and 8 feet. They are completely waterproof and suited to water, humidity and dust exposed places. An energy saving ballast is provided as standard equipment on all our products and a dimmable intensity ballast (100% to 1%) is available on some of our fixtures.

Body: Made in polyester reinforced with fibreglass (GRP), rigid including at elevated temperatures, with expanded polyurethane tight gasket. Includes: - Screws, supports and mounted straps to hold the reflector.

Diffuser: Prismatic type clear polycarbonate injected UV stable, with studied angles for its total transparency and antidazzle.

Deflector: of steel plating, ungreased and treated with powdered Epoxy-Polyester heat-hardened at 200ºC. Stable against ultraviolet radiation (does not turn yellow.)

EMND : Electromagnetic non-dimmable ballast : this fixture works with a standard ballast, lamps take few seconds to light up.

END : Electronic non-dimmable : this fixture works with an electronic ballast which produce an instant start and allows more energy saving

ED : Electronic dimmable : the electronic ballast allows a dimmable intensity from 1% to 100% without flickering and the energy consumption is proportional to intensity.

IS : Lamps light up instantly.

RS : Lamps light up rapidly.

Our fixtures are delivered with different operating voltages, line currents and with different ballasts, according to the temperature of the place where the fixture is installed.

Ballast Warranty: There is a 3 years warranty on the electromagnetic model and 5 years on the electronic model. The case, excluding the diffuser, is warranted for a period of 10 years